PREPARATIONS FOR INFLATING THE SUP BOARD: Remove all sharp edged and pointed objects from the surface in order to avoid damaging the SUP board. ASSEMBLY INSTRUCTIONS / INFLATION / DEFLATION Inflate the SUP board with the included hand pump.
1. Valve cap 2. Button 3. Valve base
Unscrew the valve cap 1 . Push the button 2 in and turn approximately 90 degrees so it is in the “OUT” position. - Insert the pump hose end piece and inflate it until you will reach the required pressure. After inflation tighten all the valve cap (clockwise). Only the valve cap can ensure final AIR TIGHTNESS. - To release air from the SUP board, remove the valve cap 1 and push the button 2 in and turn approximately 90 degrees so it is in the “IN” position. The correct pressure for this SUP board is maximum 1 bar / 15 PSI (=1000 mBar) DO NOT EXCEED THIS !! Using an electrical pump or air compressor is at your own risk. This can lead to damaging the SUP board.
MAINTENANCE SUP BOARD: Clean and check the SUP board and all accessories. Use a mild, non scouring cleanser. Make sure the SUP board is completely dry before placing it in the backpack. Otherwise this may cause mold, foul odor and the skin/hull or the inside chambers of the SUP board will suffer from water damage.
We are not the manufacturer of the products sold on the Platform. While we take every care to make sure the product information displayed here is accurate, actual product packaging and materials may contain more and different information to that displayed on our Platform. All information about the products on our Platform is provided for information purposes only. You should not rely solely on the information presented on our Platform. Please always read labels, warnings and directions provided with the product before use. If you require specific ingredient or product information you should consult the manufacturer, whose contact details will appear on the packaging or label. We are therefore unable to accept liability for any incorrect information. This information is supplied for personal use only. It may not be reproduced in any way whatsoever without our prior consent.
WARNING: SUP can be very dangerous and physically demanding. The user of this product should understand that participating in stand up paddling may involve serious injury or death. Seek SUP instruction from a licensed or certified instructor. Always check weather forecasts prior to using the SUP board. Never use the SUP board in thunderstorms and lighting conditions. Always use appropriate protective gear and wear a personal flotation device. Wear the correct protective clothing for the conditions such as a wetsuit or a UV top. Cold water and cold weather can result in hypothermia. Always carry identification. Wear a helmet when appropriate. - Do not exceed the maximum weight capacity of 150 kg. Do not operate the SUP board under the influence of drugs and/or alcohol. This model is designed to be used in flat waters (lake, rivers, sea shore) in standing and seating position. It is not recommended to use the SUP board in high waves nor for surfing. Beware of offshore winds and currents as they can take you out to sea. Check your equipment prior to each use for signs of wear, leaks or failure. Protect this article from extreme temperatures, sun and humidity. Tie the included leash to your SUP board at all times. Children should always be under adult supervision. Always inform someone your paddling route, the time and place of departure and your intended time and place of arrival. Paddling alone is not recommended. Watch out for other beach users especially swimmers and children. Make sure you keep the SUP board and paddle under control at all times. Never leave your SUP board for an extended period of time on a warm surface like a beach or other surfaces. This can cause damage to your board. Dispose of the item in accordance with local, current regulations at a collection point.